home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Night Owl 6
/
Night Owl's Shareware - PDSI-006 - Night Owl Corp (1990).iso
/
025a
/
car110.zip
/
CARHOUR.HLP
< prev
next >
Wrap
Text File
|
1990-11-11
|
47KB
|
442 lines
~90To move up and down through the log, use these keys:~70
~;0 ~70» To move the ~07highlight~70 up or down one entry
~;0 Home ~70» To move the ~07highlight~70 to the first entry on the screen
~;0 End ~70» To move the ~07highlight~70 to the last entry on the screen
~;0 PgUp ~70» To display the previous page of log entries
~;0 PgDn ~70» To display the next page of log entries
~;0Ctrl+Home ~70» To move to the very first entry in the log
~;0 Ctrl+End ~70» To move to the very last entry in the log
~90Push the first letter of these Commands to perform them:~70
~;0 A~30dd ~70» To add a new log entry at the end of the log
~;0 I~30nsert ~70» To insert a new log entry just before the ~07highlighted~70 one
~;0 V~30iew or ~;0─┘~70 » To display the details of the ~07highlighted~70 entry
~;0 E~30dit ~70» To display & edit the details of ~07highlighted~70 entry
~;0 D~30elete ~70» To delete the ~07highlighted~70 entry
~;0 S~30ort ~70» To sort the log, recalculate HPG's, and scan PM due
~;0 P~30Mdue ~70» To show when required Preventive Maintenance is next due
~;0 L~30ist ~70» To list the log on printer LPT1
~;0 F~30orm ~70» To print an inspection form on printer LPT1
~;0 M~30isc ~70» To access various miscellaneous functions
~;0 H~30elp ~70» To display this screen
~;0 Q~30uit ~70» To exit the program
~;0 Ctrl+Q~30uit ~70» To exit the program & backup machine files ~90Chris' Automobile Recorder General Information~70
Chris's Automobile Recorder keeps a maintenance log for your machine and
reminds you when Preventive Maintenance is due. It keeps minor cost
statistics, but it is intended to track maintenance, not costs.
The log consists of `events' such as buying fuel, repairs, inspections, etc.
They are listed by date, and an hourmeter reading is mandatory for some
events, optional on other types.
When you ~90add~70 an entry to the end of the log, information used to schedule
PM, estimate current hourmeter, etc. will be automatically extracted from it.
Whenever you ~90delete~70 or ~90insert~70 a Fuel, Inspection, or PM entry, you should
sort the log using the Sort function. This will extract current PM status
information from the log and recalculate all HPG's. Otherwise, PM due
dates and hourmeter readings, the estimated hourmeter, and HPG's may be
incorrect.
This program is Copyright (c) 1990 by Cooney Applied Technology,
P.O. Box 2039, Kettering, OH 45429-5001. Portions are Copyright
(c) 1985-1989 Microsoft Corp. Unless marked ß TEST, It may be freely
distributed as long as no charge other than a physical or telecommunications
media charge is made, and the program and files are not modified and complete. ~90Misc. Functions Menu~70
From this menu you may select one of several different miscellaneous
functions of this program.
For information on a function, select it from this menu and then push F1. ~90Change Current Hourmeter Estimate Starting Point~70
The current hourmeter reading for your machine is estimated based on today's
date. This program looks back and averages how many hours you used the
machine each day since a certain date, and then calculates what today's
hourmeter reading is likely to be.
This function sets the date and hourmeter reading used as the starting point
for the calculation of the estimated current hourmeter for each day. You
will want to use this if a change in your usage habits significantly changes
the rate at which you accumulate hours on a machine. For example, you may
add a second shift, or the season may change. Just set the hourmeter reading
and date of when your usage habits changed.
This will not effect other statistics, such as cost per hour. ~90Change Expense Calculation Starting Point~70
This function sets the date and hourmeter used as the starting point for the
calculation of the overall fuel economy and costs per hour. The totals
of all the expenses and fuel amounts you report after the date selected are
divided by the number of hours you have use the machine since the hourmeter
reading specified to get cost per hour and overall Hours Per Gallon.
When this program was set up for your machine, it set this date and hourmeter
reading to the date and hourmeter when you purchased the machine.
You may want to change the date and hourmeter if you do not have complete
cost or maintenance records from the date when you purchased the machine.
Just set the hourmeter reading and date of when your records start. ~90Set Default Values~70
If you wish, you can have certain items pre-entered for you on new log entry
forms, things that are often the same time after time. This is called a
default. For example, if you always buy the same type of fuel, you could
have this type already entered on the fuel entry form. You are not forced to
use it, however, and can always change it to what you want.
If you put a "Y" next to ~;0Use Today's Date~70, the current date will appear
as the date entry on new log entry forms.
If you make an entry for ~;0Backup Directory~70 then both C.A.R. files for
the current machine will be copied to that directory when the program is
exited using Ctrl+Q. ~90Set Program Options~70
You may set how far in advance reminders are given for a PM item. An entry
of 0 days will disable a reminder. The ~;01st reminder~70 causes an item to
appear in bold white on the PM report. No beep or warning message will be
given, and CAR /PM will not list or display it. A suggested number of days
is 14. You will not be given a 1st reminder for things due monthly. The
~;02nd reminder~70 causes an item to appear in bold yellow on the PM report.
A beep and warning message will be given, and CAR /PM will list it and pause.
A suggested number of days is 7.
The ~;0New Hourmeter Adder~70, if not zero, is added to the hourmeter value
entered on all new entries. This is used if your hourmeter is replaced, just
enter the reading at which it was replaced, or if your hourmeter turns over
at 10,000, enter 10000.
If ~;0Y~70 is entered for ~;0Mono Monitor~70, the program will think you have
an MDA monitor no matter what. ~;0N~70 will force C.A.R. to think you have
a color monitor (CGA, EGA, or VGA). Blank will have C.A.R. decide.
If ~;0Y~70 is entered for ~;0Don't Use Blue~70, the program will not use
~90blue text~70 for headings and other uses. This is useful for those users
whose monitors do not produce readable blue text.
If ~;0N~70 is entered for ~;0Print Line Drawing Characters~70, the program
will not print forms and logs using the "┌──────┬──────┐" characters. ~90Add Event to Log~70
To add or insert an entry in the log, select the type of entry from the list
by pushing the letter or number listed before it.
If you select "PREVENTATIVE MAINTENANCE", you will be asked to select a
specific Preventative Maintenance item from a second list.
Press the "Esc" key if you don't want to add anything to the log. ~90Select P.M. Type~70
Select the specific P.M. item that was performed from the list by pressing
the letter or number listed before it. ~90Entry Out Of Sequence Warning~70
The entry you just made or edited appears to be out of sequence either by
date or by hourmeter reading (as specified in the warning message).
If the entry has a date, look to see if an entry with an earlier date follows
it, or an entry with a later date precedes it.
If the entry has an hourmeter reading, look to see if an entry with a lower
reading follows it, or an entry with a higher reading precedes it. ~90Edit/Add Log Entry~70
Edit or fill out the displayed log entry form. You may move from blank to
blank on the form by using these keys:
~;0~70 or ~;0─│~70 or ~;0Tab~70 or ~;0Enter~70 or ~;0─┘~70 to move to the ~;0next blank~70
~;0~70 or ~;0│─~70 or ~;0Shift+Tab~70 to move to the ~;0previous blank~70
To edit the entry in a blank use these keys:
~;0─ (left arrow)~70 to move the cursor to the left
~;0─~70 to move the cursor to the right
~;0── (backspace)~70 to delete the character left of the cursor
~;0Del~70 to delete the character at the cursor
~;0Ins~70 to switch between ~;0Insert~70 and ~;0Overwrite~70 modes
In ~;0Insert~70 mode, characters you type will be inserted where the cursor is.
In ~;0Overwrite~70 mode, characters you type will replace what is already there.
When everything is correct, push ~;0F10~70 to store the entry in the log.
If you don't want to put this entry in the log, or you don't want the changes
you have made editing an entry, push ~;0Esc~70.
~90Edit/Add Log Entry (General)~70
Most items are optional and may be left blank, except:
∙ An entry must have at least a date or an hourmeter reading.
∙ Certain items must have an hourmeter reading, such as a P.M. item that is
scheduled by hours of use.
∙ Certain items must have a date, such as a P.M. item that is scheduled by
calendar months.
∙ Hourmeter reading and gallons of fuel must be supplied for fuel fill-ups
so that an HPG calculation can be performed. If you don't have the
information, enter ~;0N~70 for fill-up even if you did fill-up.
∙ Dates must be entered in ~;0MM/DD/YY~70 format, examples: 12/25/88 2/4/85
(If european date mode is selected, use ~;0DD/MM/YY~70 format)
∙ Do not put a dollar sign ~;0$~70 in front of dollar amounts.
∙ Do not put commas ~;0,~70 in numbers. ~90Statistics~70
~;0 Statistics Starting~70 This is the date and hourmeter from when you
~;0 Date & Hourmeter~70 bought the machine, or what you entered for
the Expense Calculation Starting point on the
Misc. Functions menu
~;0 Hours Used~70 This is (Today's estimated hourmeter)
minus the (Statistics Starting Hourmeter)
~;0 Years~70 The number of years since the Statistics Starting Date
~;0 Hours Per Year Avg.~70 (Hours Used) / (Years)
~;0 Hours Per Day Avg.~70 (Hours Per Year) / 365
~;0Gallons of Fuel Used~70 Total of all fuel purchases since
Statistics Starting Hourmeter
~;0 Overall HPG Average~70 (Gallons of Fuel Used) divided by (Hourmeter at
Last Fuel Purchase - Starting Statistics Hourmeter)
Today's estimated hourmeter is not used since you have
yet to buy the fuel used since the last purchase. The
last purchase hourmeter will be estimated if not supplied. ~90PM Report~70
This screen shows a list of all of the Preventative Maintenance items and
Inspections that are scheduled for your machine, along with how often they
are due and when they are next due.
If you have a color display the items will be colored based on when they are
next due, and based on how many days in advance you have asked C.A.R. to
remind you. This is normally 14 days in advance for 1st Reminder, 7 days in
advance for 2nd Reminder. See Program Options menu on Misc. Functions menu
to set them to different values. The colors are ~?01st Reminder~70, ~>02nd Reminder~70,
~<0Overdue~70. A first reminder is not given for things done once a month or
more often. Monochrome displays will show soon due and overdue entries as
~?0intensified~70.
If an item is scheduled only by hourmeter readings, estimated future
hourmeter readings will be used to see if a reminder is due.
The next due date and/or hourmeter is based on the last time something was
performed. If it never has been, it is based on when the machine was built.
A similar display results from running C.A.R. with the "/PM" option. ~90A - Add New Log Entry at End~70
Press the ~;0A~70 key to add a new log entry at the end of the log. This is
used when you want to add a new entry to the log, something that you just
did - something that happened after everything else already in the log.
If you want to add an entry to the log that belongs somewhere in the middle
and not on the end, press ~;0I~70 for the Insert function instead. You can use
the Add function instead and Sort the log, but this may be time consuming.
A customized entry form will be displayed to be filled out. When done, push
the ~;0F10~70 key to save the new event. If you do not want the new event,
and wish to discard the entry, push the ~;0Esc~70 key instead.
When you add a Fuel Entry, the fuel usage will be recorded and an HPG
calculated if it was a fill-up.
When you add an Inspection or P.M. entry, next due dates & hourmeter readings
will be updated.
If the ~;0New Hourmeter Adder~70 entry of the Defaults Menu is nonzero, the entry
will be added to the hourmeter reading you entered (with a low beep). ~90I - Insert New Log Entry Just Before the Highlight
Press the ~;0I~70 key to insert a new entry in the log just before the
~07highlighted~70 entry. This is used when you want to add an "old" entry to the
log, something that happened a while back and belongs somewhere in the middle
or beginning of the log. Move the ~07highlight~70 to where the entry you are
adding belongs and push ~;0I~70.
If you want to add a brand new entry to the log, one that belongs at the end,
you can press ~;0A~70 for the Add function instead.
A customized entry form will be displayed, and it should be filled out. When
done, push the ~;0F10~70 key to save the new event. If you do not want the
new event, and wish to discard the entry, push the ~;0Esc~70 key instead.
When you insert a Fuel, Inspection or P.M. entry, next due dates & hourmeter
readings or HPG's may become incorrect. The Sort function should be used to
correct any possible problems. A reminder will be given by the program.
If the ~;0New Hourmeter Adder~70 entry of the Defaults Menu is nonzero, the entry
will be added to the hourmeter reading you entered (with a low beep). ~90V or ─┘ - View a Log Entry~70
Press the ~;0V~70 or ~;0─┘~70 (Enter) key to display the details of the
entry currently ~07highlighted~70 in the log.
The entry can only be viewed and cannot be changed in any way.
To change an entry push the ~;0E~70 key for the Edit function. ~90E - Edit a Log Entry~70
Press the ~;0E~70 key to edit the entry currently ~07highlighted~70 in the log.
The entry will be displayed on the original entry form and can be changed at
will.
When done, push the ~;0F10~70 key to save the changed entry. If you do not
want the changes you have made, and wish the entry back as it was, push the
~;0Esc~70 key instead.
When you edit a Fuel, Inspection or P.M. entry, next due dates & hourmeter
readings or HPG's may become incorrect. The Sort function should be used to
correct any possible problems. A reminder will be given by the program.
To view an entry without danger of changing it, press the ~;0V~70 or ~;0 ─┘~70 (Enter)
key for the View function. ~90D - Delete Log Entry~70
To delete a log entry and permanently remove it from the log, move the
~07highlight~70 to the entry and push the ~;0D~70 key. The entry will be flashed
and you will be asked if you want to delete it. When asked if you are sure,
press the Y key and press Enter and the entry will be ~L0permanently discarded~70.
When you delete a Fuel, Inspection or P.M. entry, next due dates & hourmeter
readings or HPG's may become incorrect. The Sort function should be used to
correct any possible problems. A reminder will be given by the program. ~90S - Sort Log and Recalculate~70
Press the ~;0S~70 key to start the Sort Function. It will execute in three
phases or parts:
~;0Sort:~70 The entries in the log will be sorted using dates if supplied;
if not, by hourmeter readings if supplied; if not, by estimated dates. If an
entry exists with an impossible combination of date & hourmeter, the program
might not ever stop sorting. Press ~;0Esc~70 to stop the sort without harm
at any time.
The sort might take some time, be patient, or push Esc to check progress.
~;0P.M. Scan & HPG Recalculation:~70 The entries are scanned to
determine when P.M. and Inspections are next due. The Hours Per Gallon
for each fuel fill-up entry will be recalculated. A percentage of
completion will be displayed.
~;0Statistics Screen:~70 Operational statistics for the machine will be displayed
based on the scans just made. ~90P - Display when Preventative Maintenance and Inspections Next Due~70
Press the ~;0P~70 key to display a list of the date and/or hourmeter when
each Preventative Maintenance item or Inspection is next due. The list will
show all items, with those soon due or overdue highlighted and color coded.
Push ~;0F1~70 while the list is displayed for more information. ~90L - List Log on Printer~70
Press the ~;0L~70 key to print a copy of the log on printer LPT1.
Two formats will be offered. The ~;0Compact~70 format is similar to the log screen
display, with one line per log entry. The ~;0Full~70 format is similar to the
screen produced by the View function for each entry.
Options of ~;0Color~70 or ~;0Black & White~70 will be given. If you have an Epson
compatible color printer and you wish the log to be color coded, select
Color. This can add considerable time to printing the Compact listing. ~90F - Print Inspection or P.M. Form on Printer~70
Press the ~;0F~70 key to print a copy of a blank form for an Inspection or
Preventative Maintenance item log on printer LPT1. A list of customized
forms for each type of entry will be displayed to select from.
The form will remind you of exactly what to do, or can be given to a
Automotive Service Center to indicate what you want done. Blanks are
provided for needed information, and the information can be easily
transferred from the form to the C.A.R. program. ~90M - Miscellaneous Functions Menu~70
Press the ~;0M~70 key to enter the Miscellaneous Functions Menu.
Push ~;0F1~70 while the menu is displayed for more information. It has many
helpful and powerful functions for all users, check it out. ~90H - Help Screen~70
Press the ~;0H~70 or ~;0F1~70 key to access the help you are now using. ~90Q or Ctrl + Q - Quit Program~70
Press the ~;0Q~70 key or ~;0Ctrl + Q~70 keys to terminate the C.A.R. program
and return to the operating system.
Pressing the ~;0Q~70 key will immediately exit the program.
Pressing the ~;0Ctrl + Q~70 keys will cause C.A.R. to copy the C.A.R. files
for the current machine to another disk directory. If the ~;0Backup Directory~70
entry on the Defaults Menu is not blank, that directory will be used.
If it is blank, a directory name will be asked for. ~90Print Inspection or P.M. Form~70
Select the form you want to print a copy of by pushing the number in front of
it. It will be printed on printer LPT1.
The form will remind you of exactly what to do, or can be given to a
repairman to indicate what you want done. Blanks are provided for needed
information, and the information can be easily transferred from the form to
the C.A.R. program.
If you select the Preventative Maintenance selection, a list of all of the
P.M. Items will be presented. ~90Print Preventative Maintenance Form~70
Select all of the P.M. items you wish to appear on the form by pushing the
number or letter in front of each of them. An asterisk in front of an item
indicates that it is selected. Push the number or letter again to un-select
an item.
The entries will be marked using color or intensity to show how soon the are
due. They will be marked as due for ~?01st Reminder~70, ~>02nd Reminder~70, and ~<0Overdue~70.
Monochrome displays will show soon due and overdue entries as ~?0intensified~70.
Select ~;0P~70 on the Log Screen for more information.
All of the selected items will be printed on a form using LPT1. The form
will remind you of exactly what to do, or can be given to a Automotive
Service Center to indicate what you want done. Blanks are provided for
needed information, and the information can be easily transferred from the
form to the C.A.R. program. ~90Statistics (Continued)~70
~;0 Last 3 Fillup Avg.~70 This is (the total of all fuel purchase gallons
from 3 fuel fill-ups ago until the last fill-up)
divided by (the total hours between the hourmeter 4
fill-ups ago and the last fill-up). This gives
a better indication of your machine's current economy
than the HPG calculated for each purchase because
it is less affected by "filling up" your tank to random
levels. If you don't tend to fill your tank when
purchasing fuel, this may not have any valid meaning.
~;0 Total Fuel Cost~70 Total of all fuel purchase costs since the
Statistics Starting Hourmeter
~;0 Fuel Cents/Hour~70 (Total Fuel Cost) / (Hours Used)
~;0 Quarts of Oil Used~70 Total of all oil top-offs since Statistics
Starting Hourmeter. This is a measure of oil
consumption, and does not include oil changes.
~;0Mi. per Quart Overall~70 Hours Used / Quarts of Oil Used ~90Statistics (Continued)~70
~;0 MPQ Last 90 Days~70 (Quarts of Oil Used in the last 90 Days) /
(Mi. Per Day * 90), after Statistics Starting Date
~;0 Oil Consumption~70 Total cost of all oil top-offs since
~;0 Total Cost~70 Statistics Starting Date and Cents Per Hour
~;0 Other Cost Totals~70 The total cost of each of these entry types
and the Cents Per Hour average for each
~;0Total Operating Cost~70 Total of all Costs since Statistics Starting Hourmeter
~;0Total Cents Per Hour~70 (Total Operating Cost) / (Hours Used)
Other displayed Cents Per Hour's are rounded to 1/10
cent and may not add up to this total ~90Print Log Listing on Printer~70
~;0Select (F)ull or (C)ompact listing:~70 Two formats are offered. Press
~;0C~70 for a ~;0Compact~70 format similar to the log screen display, with
one line per log entry. Press ~;0F~70 for a ~;0Full~70 format similar to the
screen produced by the View function for each entry.
~;0Starting Date:~70 Enter the date of the first log entry you wish to be
printed, such as 7/4/90. Just press ~;0Enter~70 to use the date already
shown, which is the very first entry.
~;0Ending Date:~70 Enter the date of the last log entry you wish to be
printed, such as 7/4/90. Just press ~;0Enter~70 to use the date already
shown, which is the very last entry.
~;0Colored or Normal Listing:~70 You may press ~;0C~70 if you have an Epson
compatible Color printer and want the listing color coded per event type.
(This can add considerable time to printing the Compact listing.) If you
don't have a color printer or don't want a color listing, press ~;0Enter~70
for ~;0Normal~70 or ~;0Black & White~70.
After all of the above are entered press the ~;0Enter~70 key to print a copy
of the log on printer LPT1, press any other key to return to the Log Screen.
